Onwa KV-290, Installation Manual

Page: 13 / 39

Channel Comment
Display Backlight
Vibration Water Draining Function
Microphone Lock Function
10
Memory channels can be labeled with a unique alphanumeric ID of up
to 10 characters.
When the comment is more than 7 characters long, screen scroll
displays.
Capital letters, small letters (except f, j, k, p, s, v, x, z), 0 to 9, some
symbols (= * + - . /) and space can be used.
1. Select the desired channel.
Cancel Dual-watch, Tri-watch or scan in advance.
2. While pressing and holding [CH/WX], press [16] to program the
channel comment.
A cursor and the first character start blinking alternately.
3. Press [▲] or [▼] to select the desired character.
Press [16] or [CH/WX] to move the cursor forward or backward,
respectively.
4. Repeat step 3 to input all characters.
5. Press [ENT] to input and set the comment.
Press [CLR] to cancel and exit the programming mode.
The cursor and the character stop blinking.
The LCD display and keys can be backlit for better visibility under low
light conditions.
※ While pressing and holding [SCAN], press [▲] or [▼] to adjust the
brightness of the LCD and key backlight.
The backlight is selectable in 3 levels and OFF.
Vibration helps drain water away from the speaker housing (water that
might otherwise muffle the sound coming from the speaker). The
transceiver makes a vibrating noise when this function is being used.
1. While pressing and holding [▲] and [▼], rotate [VOL] and power
ON to activate the Vibration Water Draining function.
“VIB WATER” appears.
2. A low beep tone sounds while [▲] or [▼] keys are held to drain
water, regardless of [VOL] control setting.
The transceiver never accepts any key operations while the
Vibration function is activated.
The microphone lock function electrically locks [▲] and [▼] keys on the
supplied microphone. This prevents accidental channel changes and
function access.
While pressing and holding [HI/LO] on the microphone, power ON to
toggle the microphone lock function ON or OFF.
Scrolls