Online USV ZINTO A 1000, User Manual

Page: 99 / 182

98 / 181
Manual-ZintoA_final_ger_engl_it_20081017.doc
05.11.2008, Dipl.-Ing. S. Spitzley
Figure 26: Rack mounting ZINTO A 1500, ZINTO A 2000 - step 5
8.2.3 Rack installation ZINTO A 1500 Battery-
pack, ZINTO A 2000 Batterypack
On the use of several batterypacks for ZINTO A 1500 or
ZINTO A 2000 installed in a 19“ rack, two batterypacks must
be joined together as described in section 8.2.2. Please use
the special rackmount-kit for installation of 2 batteriepacks
(item no. RK-ZA1500BP).
8.2.4 Rack installation ZINTO A 3000,
ZINTO A 3000 Batterypack
The installation of the ZINTO A 3000 as well as the optional
batterypack is undertaken after fitting the mounting brackets
included in the items supplied. The screws for fastening are on
the UPS system.
8.3 Software installation
To install the DataWatch shutdown, management and monitor-
ing software, please follow the separate instructions included
on the CD.
The Green function is new on this series. This function is used
to protect the battery against deep discharge at low load. If the
Green function is activated, the loads are shut down via the
interface after a defined period of 5 minutes in the battery
mode.