Online USV ZINTO A 1000, User Manual

Page: 91 / 182

90 / 181
Manual-ZintoA_final_ger_engl_it_20081017.doc
05.11.2008, Dipl.-Ing. S. Spitzley
NOTE:
Either sliding rails from the cabinet manufacturer
or from the range of ONLINE accessories (art. no.
Rack-Kit) can be used for rack mounting.
2.) The UPS is cooled by means of forced ventilation using
internal fans. Ensure there is a space of at least 30 cm
behind the UPS.
3.) Connect the UPS system to a wall socket (with earth con-
tact) using a VDE-tested and CE-marked mains cable. To
connect the ZINTO A 3000 please use the mains cable
supplied with the unit.
ATTENTION:
The output sockets on the UPS are live after
power up.
8.1 Tower installation
8.1.1 UPS single tower installation
All models in the ZINTO A series can be used both vertically
as a tower and horizontally in a rack. ZINTO A 800, ZINTO A
1000 and ZINTO A 3000 comprise only one component in the
basic configuration. For ZINTO A 1500 and ZINTO A 2000 two
components are required for correct operation in the basic
configuration: control unit and batterypack.
There are numerous possible installation positions for ZINTO
A 1500 and ZINTO A 2000 due to the air vents on the front
and rear.