Online USV ZINTO A 1000, User Manual

Page: 105 / 182

104 / 181
Manual-ZintoA_final_ger_engl_it_20081017.doc
05.11.2008, Dipl.-Ing. S. Spitzley
is inactive, it can be reactivated by pressing TEST again
for one second.
NOTE:
The acoustic alarm cannot be switched off in the
following situations:
battery low, overload, fan failure / fault, time shut-
down, overtemperature.
If a fault is found during the system diagnostics given above,
the process is interrupted immediately and the loads con-
nected switched to the
normal mode without delay. The cause
of the fault is output on the indicator panel. You will find more
information in section 10.
ATTENTION:
Faults must be rectified. If ignored there is a risk
of loss of functionality.
NOTE:
ONLINE hotline: +49 (0) 89 / 2 42 39 90 18
DataWatch software:
You can also run a remote battery test via the DataWatch
software. You will find more information on this aspect in the
separate operating instructions on the DataWatch CD.