Online USV ZINTO A 1000, User Manual

Page: 94 / 182

93 / 181
Manual-ZintoA_final_ger_engl_it_20081017.doc
05.11.2008, Dipl.-Ing. S. Spitzley
8.1.2.2 Batterypack for ZINTO A 3000
The connection cable for the ZINTO A 3000 batterypack is
connected to the spare socket for additional batterypacks on
the rear of the ZINTO A 3000.
Further batterypacks are connected to the spare socket on the
rear of the previous batterypack.
NOTE:
Please note charging time in section 11.2.
ATTENTION:
The ZINTO A 1500 and ZINTO A 2000 do not
have any internal batteries. For correct operation,
the UPS must be connected to a batterypack!
8.2 Rack installation
In case of installation in a rack, a standardised 19“ rack with a
depth of at least 400mm (or 600mm for ZINTO A 3000) must
be used. The ZINTO A series models require a height of 2
height units (2HU).
For optimum weight distribution, use the optional ONLINE
mounting rails (art. no. Rack-Kit) or models for the specific
cabinet from the rack manufacturer! The UPS system is pref-
erably to be installed in the bottom third of the cabinet while
paying due attention to the centre of gravity as well an ade-
quate supply of fresh air.
8.2.1 Rack installation ZINTO A 800 / 1000
The optional rack kit (art. no. Rack-Kit-ZA800) is to be used for
the rack installation of the ZINTO A 800 and ZINTO A 1000.
This kit essentially comprises a base plate, a UPS bracket,
blanking panels for adaptation to a width of 19“ and mounting
material.