F1
F2
F3
F4
FLOW AND ENERGY MEASUREMENT
Loosen these two screws to
open the display and access
wiring terminals.
Loosen these three screws
to rotate the display in 90°
increments (±180°).
11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • [email protected]
F-5500 Thermal Mass Flow Meter Manual 06/17 - 2030 / 107023
Page 28
Model F-5500
INST
ALL
A
TION
Installation: Inline Type
Changing
Display
Orientation
Changing the Orientation of the F-5500 Display
The display can be rotated in 90° increments for optimal viewing of the screen. First,
open the enclosure by unscrewing the enclosure cap and loosen the two captive
phillips screws to open the display assembly. Detach the display board from the
metal shield by loosening the three screws on the back of the round shield. Rotate the
display board to the desired orientation. Ensure that the display cable is routed flat and
straight through the display hinge to prevent binding. Reattach the display board to the
metal shield by tightening the three screws. Close the display assembly and secure it
to the enclosure with the two captive screws. Finally, install the enclosure cover back
on the front of the enclosure.
Fig. 2.13 - Accessing Wiring Terminals or Rotating the Display
Wiring: General
Scope
Precautions
Power Wiring
Signal Wiring
