ONEUW ONE160x, User Manual

Page: 7 / 54

IMPORTANT INFORMATION
•
Do not leave the strobe in overheated environments such as car
interiors in summer or boat engine compartments. Do not expose
the strobe in summer directly to the sun for prolonged periods,
overheating can damage the unit and create dangerous situations.
•
To recharge the battery packs, use only the specific battery charger
supplied with the strobe, following the appropriate instructions for
use (chapter 5.4). Recharge the battery packs in cool rooms and
avoid overheating when using them.
•
If the strobe is flooding turn it off immediately and for your safety
do not use it until reconditioning to technically efficient condition.
Send the unit to our plant or authorized service centers for
inspection. Carefully read the instructions given in this manual in
the relevant chapter (16.0)
•
Strictly follow the instructions on how to connect the strobe.
Camera model, wiring mode, single or dual units, interface with
strobes of other brands, are all parameters that should be carefully
checked for compatibility. The strobe and the units connected may
be seriously damaged due to improper connections. Carefully read
the instructions given in this manual in the relevant chapter (14.0).
•
Do not fire the strobe directly into the lens of a digital camera, the
camera sensor may become damaged.
•
Do not fire the strobe directly into the eyes of someone, and do not
look at the emission of lightning flash, it could cause retinal injury.
2