ONEUW ONE160x, User Manual

Page: 45 / 54

PROBLEMS - ERROR INDICATIONS - MAINTENANCE
17.0 Maintenance
The strobe is made from a solid block of anticorodal aluminium
protected by a hard anodizing treatment and nanotech quartz coating
which makes surface hydrophobic.
To preserve the look and maintain the functionality of the unit, a
rinsing in fresh water and a careful drying is necessary after each dive
in saltwater. The water stagnation in strobe cavities such as safety
valve or optical socket need to be avoid. Blow repeatedly in these
areas. Periodic cleaning with a neutral detergent is recommended. Do
not use any chemicals products to clean the strobe.
Clean and lubricate battery compartment lid o-ring regularly. A light
coating of silicone grease is sufficient, do not exceed with the product.
Clean and lubricate the o-rings of strobe socket and synchro cable
plugs periodically.
Attention is recommended when the synchro cable is removed from
the strobe socket, water drops must do not fall on the connection pins.
Pay careful attention to this operation, all connections must be kept
dry.
Store the synchro cables with their own protective caps, avoiding
cables tangling. Always put the protective cap on the strobe synchro
socket when no cable is inserted.
i
Slight stains on the anodised aluminium surface, due reaction with
the marine sodium chloride, are not to be considered defects that
may compromise the protection of the components, but as effect
of ordinary wear and tear.
40