ONEUW ONE160x, User Manual

Page: 34 / 54

SINGLE-STROBE AND MULTI-STROBE SET-UP
14.0 Single-Strobe and Multi-Strobe set-up
14.1 Nikon cameras
Nikon's TTL digital protocol provides for signal transmission by 5-pin
cables.
i-TTL auto exposure mode may be supported by both a single ONE160x
and a pair of them (or more units) connected via synchro cable to
digital camera.
To operate in i-TTL mode, the housing can be equipped with both 5-pin
NV and six-pin S6 connections, even in a mixed configuration.
Single-Strobe set-up
§
Single NV or S6 socket with all 5 wires connected
ONE160x
Selectable mode: i-TTL or manual
Multi-Strobe set-up “ONE-NVslv”
§
1ts NV or S6 socket
(on the left or right)
with all 5 wires connected
ONE160x - main strobe called MASTER unit
Selectable mode: i-TTL or manual
§
2nd NV or S6 socket
(on the left or right)
with all 5 wires connected
ONE160x - secondary strobe called SLAVE unit
Selectable mode: i-TTL or manual
§
3rd NV or S6 socket
(other position)
with all 5 wires connected
ONE160x - secondary strobe called SLAVE unit
Selectable mode: i-TTL or manual
Strobe Unit: ONE160x MASTER ONE160x SLAVE
Mode: i-TTL i-TTL or manual
Mode: manual manual
29