ONEUW ONE160x, User Manual

Page: 17 / 54

GETTING STARTED - POWER SUPPLY MANAGMENT
i The battery compartment is full watertigh. In the event of water
seeping due a wrong battery cap compatment positioning, the
inside of strobe body, where the electronic is installed, will be not
flooded. If the power pins into the battery compartment are
oxidized they have to replaced. The repair must be carried out at
ONEUW’s premises or authorized service centers.
Do not charge the battery pack when it is placed in battery
compartment - remove and charge it in a cool and ventilated place
to avoid overheating.
Do not insert the battery pack into the strobe compartment after
charging if they are still hot.
Do not handle the battery packs or battery charger with wet hands.
Do not remove the battery pack from battery compartment when
strobe is turn on.
5.5 Battery pack state of charge check
The battery charge status is shown every time at unit turn on/off. The
three-level charge indication is displayed by a series of horizontal
segments, as shown in the following page. The data is to be considered
as indicative and depends on external factors such as temperature, age
of the batteries and their wear. For a correct battery charge indication
in shut-down step, before turn-off the strobe wait for about 20-30
seconds without flashing.
12