FLASH EXPOSURE MODES
-
ADVANCED OPERATIONS
11.0 Rear-curtain sync
11.1 Rear-curtain sync Nikon cameras
This flash synchronization mode is activated via the camera and the
unit does not need to be set. The display of the activated function is
visible by the light up of the dedicated icon in the camera display.
11.2 Rear-curtain sync Canon cameras
This flash synchronization mode is activated by the right INPUT control
selector on the strobe.
Pressing it for a long time the rear-curtain sync mode is activated and it
is signaled by the light up of the SYN and SLV indicators light. By
pressing the selector a first beeping sound will be issued immediately,
followed by a second beeping sound which will be issued after about
two seconds. After the last beeping sound the INPUT control selector
can be released.
i
In both version, Nikon and Canon, the rear-curtain synchronization
mode is available when in use are digital cameras connected to
the strobe by a synchro cable correctly wired according to the
specific i-TTL or E-TTL protocol (chapter 14.0).
25
Summary of Contents for ONE160x
