ONEUW ONE160x, User Manual

Page: 19 / 54

GETTING STARTED - POWER SUPPLY MANAGMENT
6.0 Strobe switching on/off
The strobe is switched on and off by pressing the MAIN and INPUT
lever selector simultaneously.
Turning on the unit is indicated by the visual indications on the display
and by a single beeping sound after which the lever selectors can be
released.
When the strobe is switched on, the following information are showed
on the display:
-Firmware release number and strobe version
-Battery charge status
Together with this information, all the indicator lights on the display,
MAIN section on the left and INPUT section on the right, light up at the
same time for a check.
The strobe is switched off by pressing the MAIN and INPUT lever
selectors simultaneously for a few seconds. A first beeping sound is
emitted after one second and keeping the pressure on the lever
selectors a second acoustic signal will warn that the lever selectors can
be released. The strobe will turn off after displaying the battery charge
status on the display.
i
The left and right lever selectors, operated either individually or
together, give different commands depending on the operating
time that we can classify as short (one pulse) or long (one or more
seconds depending on the command).
14