OMS LINEA ESSE, Instruction Handbook Manual

Page: 26 / 70

OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017
26
TURBINE OPERATIONS
Extract the instrument from its housing. Then:

pressing the lever (A) of the foot control in the rest position will enable
the chip-blower;

move the lever A to the right to operate the instrument;

If lever A is pressed simultaneously, the turbine is sprayed (standard
configuration).
Note:
Upon request, at the time of installation, the technician can change the connections so that
the spray function can be operated without having to press the lever.
MICROMOTOR OPERATIONS
Extract the instrument from its housing:

pressing the lever (A) of the foot control in the rest position will enable the
chip-blower; The spray is pre-selected in the instrument table by engaging
the control

move the lever A to the right to operate the instrument; To invert the
micromotor rotation, move the foot control lever A to the left and press it
downwards

Then, spray delivery is possible when the foot control lever (A) is slightly
pressed with the instrument in operation (standard configuration).
Note:
Upon request, at the time of installation, the technician can change the connections so that
the spray function can be operated without having to press the lever.