![background image](http://html.mh-extra.com/html/omron/zs-l/zs-l_user-manual_1633386051.webp)
S
ect
io
n
2
IN
STALLATION &
CONNECTI
O
N
Section 2
SmartMonitor ZS
2-23
ZS-L
User’s Manual
Starting up SmartMonitor ZS
After installation is completed, start up SmartMonitor ZS by the following procedure.
1.
Make sure that the Sensor Controller is connected to the personal computer.
2.
Turn the Sensor Controller ON and set it to the RUN mode.
3.
Select [Programs]-[OMRON]-[SmartMonitorZS] from the Windows [Start] menu.
■
When the connection between the personal computer and
Sensor Controller cannot be established
Check the COM port No. assigned on the personal computer in Device Manager.
1.
Right-click [My Computer] on the Windows desktop and click [Properties].
2.
Click [Device Manager(D)] on the [Hardware] tab.
3.
Open [Port (COM/LPT)], and check which number COM in [OMRON Smart Sensor
USB COM] is set to.
4.
Set this COM port No. to the [Communication Settings] screen on SmartZS
Monitor.
If “OMRON Smart Sensor USB COM” is not recognized in Device Manager, re-install the USB driver
and reboot the personal computer.
Summary of Contents for ZS-L -
