![background image](http://html.mh-extra.com/html/omron/zs-l/zs-l_user-manual_1633386129.webp)
6-19
ZS-L
User’s Manual
S
e
ct
ion 6
AP
PE
NDIX
Section 6
APPENDIX
Ex-
ternal
I/F
Connection method
Serial I/O or connector
Prewired (standard cable length: 2 m)
Serial I/O
USB2.0
1 port, FULL SPEED[12 Mbps], MINI-B
RS-232C
1 port, max. 115200 bps
Output
3 judgment outputs:
HIGH/PASS/LOW)
NPN open-collector, 30 VDC, 50
mA max. residual voltage; 1.2 V
max.
PNP open-collector 50 mA max.
residual voltage; 1.2 V max.
Linear output
Selectable from voltage/current
(selected by slide switch on base)
• At voltage output : -10 to +10 V, output impedance: 40
Ω
• At current output : 4 to 20 mA, max. load resistance: 300
Ω
Input
LDOFF input (LD
forced OFF)
ON: Short-circuited with 0V
terminal or 1.5 V max.
OFF: Open (leakage current: 0.1
mA max.)
ON: Supply voltage short-circuited
or within supply voltage -1.5 V
OFF: Open (leakage current: 0.1
mA max.)
ZERO reset input
(ZERO reset execu-
tion/cancel)
Timing input (sam-
ple cycle specified
when hold function
is enabled)
RESET input (reset
of hold state)
Status indicators
HIGH (orange), PASS (green), LOW (orange),
LDON (green), ZERO (green), ENABLE (green)
Segment display
Main display
8-segment red display, 6 digits
Sub-display
8-segment green display, 6 digits
LCD
16 digits x 2 rows, color of characters: green,
resolution per character: 5 x 8 pixel matrix
Setting input
Setting keys
Direction keys (UP/DOWN/LEFT/RIGHT), SET key, ESC key,
MENU key, function keys (1 to 4)
Slide switch
Threshold switch (H/L 2-state)
MODE switch (FUN/TEACH/RUN 3-state)
Power supply voltage
21.6 V to 26.4 V (including ripple)
Current consumption
0.5 A max. (when Sensor Head is connected)
Insulation resistance
Across all lead wires and controller case: 20 M (at 250 V)
Dialectic strength
Across all lead wires and controller case, 1000 VAC, 50/60 Hz, 1 min
Noise immunity
1500 V peak-to-peak, pulse width 0.1
µ
s, rising edge: 1 ns pulse
Vibration resistance (destructive)
10 to 150 Hz, 0.7-mm double amplitude, 80 min each in X, Y, and Z
directions
Shock resistance (destructive)
300 m/s
2
3 times each in six directions (up/down, left/right, forward/
backward)
Ambient temperature
Operating: 0 to 50×C
Storage: -15 to +60×C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Materials
Case: Polycarbonate (PC)
Weight
Approx. 280 g (excluding packing materials and accessories)
Item
ZS-LDC11
ZS-LDC41
Summary of Contents for ZS-L -
