![background image](http://html1.mh-extra.com/html/omron/wago-i-o-system/wago-i-o-system_connection-manual_1633448009.webp)
5
.
Applicable
Devices and Device Configuration
6
Precautions for Correct Use
The connection line of EtherCAT communication cannot be shared with other Ethernet
networks.
Do not use devices for Ethernet such as a switching hub.
Use the cable (double shielding with aluminum tape and braiding) of Category 5 or higher,
and use the shielded connector of Category 5 or higher.
Connect the cable shield to the connector hood at both ends of the cable.
Precautions for Correct Use
Update the Sysmac Studio to the version specified in this section or higher version using the
auto update function.
If a version not specified in this section is used, the procedures described in
Section 7
and
subsequent sections may not be applicable. In that case, use the equivalent procedures
described in the
Sysmac Studio Version 1 Operation Manual
(Cat. No. W504).
Additional Information
For information on the specifications of the Ethernet cable and network wiring, refer to
Section 4 EtherCAT Network Wiring
of the
NJ-series CPU Unit Built-in EtherCAT Port User's
Manual
(Cat. No. W505).
Additional Information
The system configuration in this document uses USB for the connection to the Controller.
For information on how to install a USB driver, refer to
A-1 Driver Installation for Direct USB
Cable Connection
of the
Sysmac Studio Version 1 Operation Manual
(Cat. No. W504).
Summary of Contents for WAGO-I/O-SYSTEM
Page 32: ...2014 0414 P594 E1 01...