![background image](http://html1.mh-extra.com/html/omron/wago-i-o-system/wago-i-o-system_connection-manual_1633448019.webp)
7
.
EtherCAT
Connection Procedure
16
5
Confirm that there is no error in
the set value and 1 is set.
Click the
Write
Button.
6
The Slave Node Address Writing
Dialog Box is displayed.
Click the
Write
Button.
Then, a screen is displayed
stating "Writing node addresses
to slaves was successfully
completed".
Check the contents and click the
Close
Button.
7
Cycle the power supply to the
Slave Unit.
8
The EtherCAT Tab Page is
displayed again. Right-click
Master
and select
Compare
and Merge with Actual
Network Configuration
.
A screen is displayed stating
"Get information is being
executed".
9
The Compare and Merge with
Actual Network Configuration
Dialog Box is displayed.
Node address 1 and
750-354/000-001
Rev:0x00010002 are added to
the Actual network configuration
after the comparison.
Click the
Apply actual network
configuration
Button.
Summary of Contents for WAGO-I/O-SYSTEM
Page 32: ...2014 0414 P594 E1 01...