![background image](http://html1.mh-extra.com/html/omron/wago-i-o-system/wago-i-o-system_connection-manual_1633448021.webp)
7
.
EtherCAT
Connection Procedure
18
7.3.3. Setting the Device Variables
Set the device variables used for the EtherCAT Slave Unit.
1
Select
Offline
from the
Controller Menu.
The yellow bar on the top of the
Edit Pane disappears.
2
Select
750-354/000-001
Rev:0x00010002
set in the
previous steps in the EtherCAT
Tab Page and confirm that
Device name is E001.
* Device name can be changed
as desired.
Click the
Edit Module
Configuration
Button.
3
The Node1:
750-354/000-001(E001) Tab
Page is displayed.
Select each configured module
in order and confirm that Device
name is as follows:
・
750-5xx / 750-15xx
(2b out)(M1) : M1
・
750-5xx / 750-15xx
(2b out)(M2) : M2
・
750-4xx / 750-14xx
(4b in)(M3) : M3
* Device name can be changed
as desired.
* The device name you set is
used at the beginning of the
device variables.
Summary of Contents for WAGO-I/O-SYSTEM
Page 32: ...2014 0414 P594 E1 01...