7
.
EtherCAT
Connection Procedure
15
7.3.2. Setting Up the EtherCAT Network Configuration
Set up the EtherCAT network configuration.
1
Confirm that a yellow bar is
displayed on the top of the Edit
Pane which indicates an online
connection is established.
2
Right-click
Master
on the
EtherCAT Tab Page of the Edit
Pane, and select
Write Slave
Node Address
.
* If the EtherCAT Tab Page is
not displayed on the Edit Pane,
display it by following step 8 of
7.3.1. Starting the Sysmac
Studio and Installing the ESI
File
.
A screen is displayed stating
"Get information is being
executed".
3
The Slave Node Address Writing
Dialog Box is displayed.
The present value (setting node
address) and 750-354/000-001
Rev:0x00010002 are displayed
in the Actual network
configuration.
* If the present value of the node
address is 0, an error
is
displayed.
4
Enter
1
in the
Set value
Field for
a node address.
Summary of Contents for WAGO-I/O-SYSTEM
Page 32: ...2014 0414 P594 E1 01...