![background image](http://html1.mh-extra.com/html/omron/v640-hs61/v640-hs61_user-manual_741375117.webp)
115
CIDRW System
User’s Manual
SEC
TION 5
When SECS Is Not Used
SECTION 5
Troubleshooting
From Trial Operation to Communications
Errors are indicated by the status of the indicators after transmission of the write command, and by the
response code of the response.
• If the ID Tag Was Processed Normally:
If there is no response to the write command, refer to the
From Installation to Trial Operation
,
Operation Check Flowchart
.
Refer to page 113.
Indicators
RUN
COMM
NORM
ERROR
Response Code for the Response
Type
Response
code
Function
Normal
00
The ID Tag was processed normally.
Error occurrence
Is the response
code 1
?
No
Yes
Check the command format.
If the response code is 1
Refer to page 116.
Yes
Communications with the ID Tag has failed.
If the response code is 7
Refer to page 116.
Write command sent
RUN indicator
OFF?
No
Yes
An error has occurred at the Amplifier Unit.
Amplifier Unit error
Is the response
code 7
?
Communications OK
No
(Lights once)
(Lights once)
Summary of Contents for V640-HS61
Page 14: ...12 INTRODUCTION Reading this Manual CIDRW System User s Manual INTRODUCTION MEMO...
Page 120: ...118 SECTION 5 When SECS Is Not Used CIDRW System User s Manual SECTION 5 Troubleshooting MEMO...
Page 171: ...CIDRW System User s Manual SECTION 6 Protective Construction SECTION 6 Appendix 169 MEMO...
Page 173: ......