Omron SYSDRIVE 3G3EV SERIES, User Manual

Page: 87 / 88

7-10
List of Constants Used with 3G3EV Standard Model
Constant
no.
Indi-
cators
Description Setting range Setting
n01 Constant 0: Only n01 can be set.
write-inhibit
1: All constants can be set.
selection
8: Constant settings are initialized.
/constant
initialization
9: Inverter is initialized in 3-wire
sequence mode.
n02 Mode operation
selection Run command Frequency
reference
0 Digital Operator Digital Operator
1 Control terminal Digital Operator
2 Digital Operator Control terminal
(voltage input)
3 Control terminal Control terminal
(voltage input)
4 Digital Operator Control terminal
(amperage
input)
5 Control terminal Control terminal
(amperage
input)
n03 Stop mode 0: Deceleration stop
selection
1: Free running
n04 Forward
/Reverse
f%r
: forward rotation
rotation
selection
reU
: reverse rotation
n06 Multi-function 0: Forward/reverse rotation command
input selection
1: Fault reset
2: External fault (external fault when ON)
3: External fault (external fault when
OFF)
4: Multi-step speed command
n09 Multi-function 0: Fault occurrence
output selection
1: Operation in progress
2: Frequency matching
n11 Frequency
reference 1 0.0 to 400 (Hz) [6.0]
n12 Frequency
reference 2 0.0 to 400 (Hz) [0.0]
n20 Acceleration
time 0.0 to 999 (seconds) [10.0]
Appendix A
Chapter 7