Omron NYP - 1 Series, Hardware User Manual

Page: 154 / 266

Ground Connection Details
This section provides details about the ground connection.
Use the ground terminal on the backside of the monitor to ground your Industrial Panel PC.
The washers and screw
A
are pre-mounted at the Industrial Panel PC.
C B
A
Remove the pre-mounted washers and screw
A
and then mount the ground connection wire
C
to
the Panel PC
B
using the washers and screw
A
.
Tighten the screw with a torque of 1.2 N·m max.

Crimp terminals
Use crimp terminals with dimensions X = M4 and Y = 8 mm max.
Y X Y X
5 Installation
5-34
NY-series Industrial Panel PC Hardware User's Manual (W555)