Omron NYP - 1 Series, Hardware User Manual

Page: 158 / 266

5-4-4
Wire the I/O Connector
This section describes how to wire the I/O connector.
I/O Connector Wiring Materials
Use the supplied I/O connector to connect the inputs and outputs to the Industrial Panel PC.
Recommended I/O conductor sizes for the connector are provided in the table.
Wire type Conductor cross-section
Solid conductor
0.2 to 1.5 mm
2
Flexible conductor
Flexible conductor, with ferrule and no plastic sleeve
0.25 to 1.5 mm
2
Flexible conductor, with ferrule and plastic sleeve
0.25 to 0.75 mm
2
Minimum AWG according to UL/cUL 24
Maximum AWG according to UL/cUL 16
I/O Connections
This section describes I/O connection details.
1
3
5
2
4
6
Pin Description Internal Circuit Details
1 Power Status Output The Power Status Output has an internal relay. Wire this accord-
ing to the input device connected to the Power Status Output.
2
5 Installation
5-38
NY-series Industrial Panel PC Hardware User's Manual (W555)