Omron NYB17-11, User Manual

Page: 222 / 244

A-1-2
BIOS - Main
The main setup screen gives platform information about the BIOS, Board Information, Firmware Revi-
sion, MAC Addresses and information about the number of Boots and the Running Time.
Changeable BIOS Main parameters and their factory default values:
•
System Date
Use the Enter key to the next Date field.
• System Time
Use the Enter key to the next Time field.
A-1-3
BIOS - Advanced
This section provides advanced BIOS information.
Changeable BIOS Advanced parameters and their factory default values:
Item Default / Remark
Machine Control
*1
Disabled
Graphics Primary Graphics Device Auto
Internal Graphics Device Auto
IGD Pre-Allocated Graphics Memory 32M
IGD Total Graphics Memory 256M
Primary IGD Boot Display Device Auto
Active LFP Configuration
•
eDP / for Industrial
Panel PC
•
No Local Flat Panel /
for Industrial Box PC
Digital Display Interface 1 HDMI/DVI
Digital Display Interface 2 HDMI/DVI
Hardware Health
Monitoring
*1
Start Temperature 50 C
Temperature Range 30 C
Minimum Fan Speed 30% / Fixed
Maximum Fan Speed 100%
Fan Always On At Minimum Speed Disabled
PCI & PCI Express PCI Latency Timer 32 PCI Bus Clocks
PERR # Generation Disabled
SERR # Generation Disabled
PIRQ Routing & IRQ Res-
ervation PIRQA,B,C,D,E,F,G,H Auto
PCI Express Settings Relaxed Ordering Disabled
Extended Tag Disabled
No Snoop Enabled
Maximum Payload Auto
Maximum Read Request Auto
ASPM Disabled
Extended Synch Disabled
Link Training Retry 5
Link Training Timeout (us) 100
Unpopulated Links
Disabled
Restore PCIe Registers Disabled
Appendices
A - 4
NY-series Industrial Box PC User's Manual (W553)