background image

Refer to 

A-1-5 BIOS - Boot

 on page A - 9 for Boot details.

Security

Refer to 

A-1-6 BIOS - Security

 on page A - 10 for Security details.

Save & Exit

Refer to 

A-1-7 BIOS - Save & Exit

 on page A - 10 for Save and Exit details.

BIOS - Navigation and Function Keys

The right part of the BIOS screens is divided in two parts.

Top part.
Provides additional information on selected screens or parameters.
Bottom part.
Provides information on Keys.

àß

 : Select Screen

Changed between different BIOS pages.

áâ

 : Select Item

Changed between different parameters.

Enter: Select

Selects the parameter that has the focus and displays a submenu or the possibility to change the
parameter.

+ / - : Change Option

Change settings. A numerical value will be increased or decreased. A boolean value will toggle.

F1: General Help

Displays help information.

F2: Previous Values

Changes all parameters to the values they had when entering the BIOS.

F9: Optimized Defaults

Changes all settings to the default values.

F10: Save & Exit

Saves all changes and exits the BIOS.

ESC: Exit

Go one level up. For parameters this is the previous level. For the main pages this exits the BIOS.

BIOS Password & Write Protection

A BIOS password protects the BIOS setup program from unauthorized access. This ensures that
users cannot change the system configuration without authorization. With an assigned BIOS pass-
word, the BIOS prompts the user for a password on a setup entry. If the password entered is wrong,
the BIOS setup program will not launch.
The BIOS uses encryption for the password.
The BIOS password is case sensitive with a minimum of 3 characters and a maximum of 20 charac-
ters. Once a BIOS password has been assigned, the BIOS activates the grayed out 

BIOS Update and

Write Protection

 option. If this option is set to 

enabled

, only authorized users (users with the correct

password) can update the BIOS. With the BIOS password protection and the BIOS update and write
protection, the system configuration is completely secured. If the BIOS is password protected, you
cannot change the configuration of an end application without the correct password.

Appendices

A - 3

NY-series Industrial Box PC User's Manual (W553)

A-1 BIOS

A

A-1-1 BIOS Overview

Summary of Contents for NYB17-11





















































































































































































































































Reviews: