Omron NYB17-11, User Manual

Page: 151 / 244

3
Connect the I/O connector.
Hold the black part A when inserting the connector, this enables the auto-locking mechanism.
B
A
Do not tilt the orange levers B because this will unlock the connector.
4
Connect the DVI connector to an external monitor such as the Industrial Monitor and tighten
the fastening screws.
For an Industrial Panel PC this is optional because a monitor is integrated.
5
Connect a device to the optional interface (DVI or RS-232C) if applicable and tighten the fas-
tening screws.
6
Connect the USB ports to peripheral devices .
7
Connect the Box PC to the required Ethernet interface connector(s).
Refer to
4-2-4 Ethernet Connector Specifications on page 4 - 19 for Ethernet port details.
The Box PC is connected.
5 Installation
5 - 43
NY-series Industrial Box PC User's Manual (W553)
5-5 Connect
5
5-5-2 Connection Procedure