Omron NYB17-11, User Manual

Page: 67 / 244

System Status Tab
The System Status tab displays actual states and diagnostic information like internal temperature, fan
revolution, battery and power supply status.
A status that requires attention is indicated with a red bar.
Item Description
Internal Temperature
*1
The average CPU temperature.
Fan Revolution
*2
The actual rotation speed for each fan in revolutions per minute (r/min).
•
First number = rotation speed of fan located closest to Power button.
•
Second number = rotation speed of fan located closest to battery.
Fan Status
*3
The target speed for the fans is dynamically set based on the CPU temperature. The
target speed is compared with the actual fan speed.
•
OK indicates both fans are running on the target speed.
•
Low revolution speed indicates one or both fans do not reach the target speed.
Clean the fans and replace the Fan Unit if the problem persists.
Refer to
7-2-3 Replace the Fan Unit on page 7 - 16 for replacement details.
Battery Status The battery status.
•
OK indicates the battery is full.
•
Low indicates the battery voltage is low. Replace the battery.
Refer to 7-2-4 Replace the Battery on page 7 - 18 for replacement details.
Power Supply The power supply status is determined by the UPS and reported to the Box PC via the
I/O connector.
•
NormalPowerSupply indicates the Box PC is powered by the 24V power supply.
•
UPS Power Supply indicates that there is no power from the 24V power supply
and the Box PC runs on battery power from the UPS.
*1. Not for products NY512-A £
Refer to 1-4 Product Configuration on page 1 - 5 for configuration details.
*2. The Fan Revolution will always show 0 (r/min) / 0 (r/min) for fanless models
3 Software
3 - 7
NY-series Industrial Box PC User's Manual (W553)
3-2
Support Software
3
3-2-3 Industrial PC Support Utility