Omron NY Series, Manual

Page: 79 / 100

5-2-3
Modify the NS-Runtime Project
An NS Project that is converted to an NS-Runtime Project will probably have content that has been not
corrected or checked for the NS-Runtime functionallity. The changes in functionallity are reported in
detailed logs per conversion step.
Modify the content of your NS-Runtime project with the content of the detailed log reports.
Refer to
5-2-1 Upgrade an NS Project to Version 8.1 on page 5-4 for details.
To modify the NS project to NS-Runtime:
1
Check and where applicable modify the settings of the Communication in NS-Runtime.
Refer to Communication in NS-Runtime on page 5-8 for details.
2
Check and where applicable modify the settings of the System Configuration in NS-Runtime.
Refer to System Configuration in NS-Runtime on page 5-11 for details.
3
Check and where applicable modify the settings of the Functions in NS-Runtime.
Refer to Functions in NS-Runtime on page 5-16 for details.
4
Correct object dimensions, fonts and the screen resolution.
Refer to
5-2-4 Modify Object Dimensions, Fonts and Screen Resolution on page 5-17 for de-
tails.
The NS-Runtime project is modified and ready to be tested.
5 Conversion Procedures
5-7
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
5-2 Software Conversion
5
5-2-3
Modify the NS-Runtime Project