4
Attach the panel mounting brackets from the back of the panel as shown in the following figure.
Catch the brackets
C
in the mounting holes
C
D
in the Panel PC, pull forward lightly, and then
use a Phillips screwdriver to tighten the screws and secure the Panel PC to the panel, which
will be held between the mounting brackets and the Panel PC.
Image
A
shows the parts and mounting action.
Image
B
shows the situation with the panel
E
and the optional PWA
F
.
A
B
C
F
C
D
D
E
5
Ensure all mounting brackets are mounted.
The number of mounting brackets differs per model.
07"
09"
12"
15"
6
Tighten all mounting brackets to a torque of 0.6 N·m to maintain water and dust resistance.
Precautions for Safe Use
The mounting panel must be between 1.6 and 6.0 mm thick. Tighten the Mounting Brackets
evenly to a torque of 0.6 N·m to maintain water and dust resistance. If the tightening torque ex-
ceeds the specified value, or the tightening is not even, deformation of the front panel may oc-
cur. Additionally, make sure the panel is not dirty or warped and that it is strong enough to hold
the product.
4 Installation
4-6
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
