7
Select
Tools
-
Convert
-
Model..
to view the Convert Model window.
8
Select
NS-Runtime
and select
OK
.
A detailed log window with restrictions will appear.
Attention.
NS-Runtime will be displayed if the source version is in the range of Ver. 6.5 to Ver. 8.1.
For source versions higher than V8.1 refer to
5-2-1 Upgrade an NS Project to Version 8.1
9
Save the content of the detailed log window.
10
Select
OK
to start the conversion process.
11
Save this new project, this is the NS-Runtime project.
12
Correct or add the functions mentioned in the detailed log in your NS-Runtime project.
Attention.
The saved detailed log indicate the functions that required attention.
• To facilitate the correction of software settings details on the differences and support de-
tails are available.
• Refer to
• Refer to
System Configuration in NS-Runtime
on page 5-11 for details.
• Refer to
• Refer to NS-Runtime Software User's Manual (V093) for details on the differences be-
tween the NS series products and NS-Runtime.
• Refer to NS series Programming Manual (V073) for functions implemented for NS-Run-
time V8.2 and onwards.
The NS project is converted to NS-Runtime.
5 Conversion Procedures
5-6
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
