5-2-1
Upgrade an NS Project to Version 8.1
This section provides the details to upgrade an NS Project to Version 8.1.
The option to convert to NS-Runtime is only available in NS Projects with Version 8.1.
If your NS Project has a version
• higher than Version 8.1
Contact your local OMRON representative for support to convert the NS Project to Version 8.1.
• lower than Version 8.1
Follow the steps in the procedure below to convert the NS Project to Version 8.1.
To upgrade an NS project to Version 8.1:
1
Open
CX-Designer
2
Open the NS Project that needs the upgrade to Version 8.1.
3
Select
Tools
-
Convert
-
Version..
to view the Convert Version window.
4
Select
System Ver8.1
.
5
Select
OK
to start the conversion process.
The
Convert to:
window appears.
6
Save this upgraded project as a
CX-Designer Project File(*.IPP)
.
The NS project is upgraded to version 8.1.
In CX-Designer in the right bottom corner the version
System Ver8.1
is visible.
5 Conversion Procedures
5-4
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)