5-2-2
Convert Model of an NS Project to NS-Runtime
This section provides the details to convert an NS Project model to an NS-Runtime model for the Pan-
el PC.
Attention.
NS -Runtime will be displayed if the source version is in the range of Ver. 6.5 to Ver. 8.1.
For source versions higher than V8.1 refer to
5-2-1 Upgrade an NS Project to Version 8.1
NS-Runtime projects maintain object sizes and positions when converted from NS. For the best con-
version there are two steps:
1. Convert the NS project to a model with the best possible object dimensions.
2. Convert the NS project that has good object dimensions to NS-Runtime
To convert the NS Project to an NS-Runtime Project:
1
Open the project
2
Select
Tools
-
Convert
-
Model..
The Convert Model window willl appear.
3
Select the model that resembles the screen size of the target Panel PC.
Example: Select
NS15-
for a 15 inch Panel PC.
4
When converting to a larger screen check the box
Enlarge Screen
.
5
Select
OK
and save the new project.
This new project has the correct version 8.1 and the best possible settings for the new screen
diameter. Next step is to convert it to NS-Runtime.
6
Open the new project.
5 Conversion Procedures
5-5
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
5-2 Software Conversion
5
5-2-2
Convert Model of an NS Project to NS-Runtime
