5-2
Software Conversion
This section covers the software actions that are required for the conversion from NS-series products
to NYE-series products.
In this section for some software changes detailed information is available.
For all information about the software of the Panel PC refer to NY-series NYE Industrial PC Operating
Systems and Software Utilities Manual (Cat.No. W635).
The software actions for the conversion:
• Ensure NS-Runtime is installed.
• Ensure your NS Project has Version 8.1.
Refer to
5-2-1 Upgrade an NS Project to Version 8.1
• Convert your NS projects to NS-Runtime projects.
Refer to
5-2-2 Convert Model of an NS Project to NS-Runtime
on page 5-5 for details.
• Modify your projects for the differences between an NS Project and an NS-Runtime Project.
Refer to
5-2-3 Modify the NS-Runtime Project
• Test your NS-Runtime Projects.
• Create Backup and Repair Data.
Refer to
5-2-7 Create Backup and Repair Data
5 Conversion Procedures
5-3
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
5-2 Software Conversion
5
