3-2 Installing a PCI Board and Setting the DIP Switch
3-4
3
In
st
alling t
h
e NSA-
ser
ies I
n
dust
rial PC and Connect
ing Per
ipher
al Devices
3-2 Installing a PCI Board and Setting
the DIP Switch
Follow the steps below to install a PCI Board or to change the default setting of
the DIP switch.
Removing the Side Cover
Note
Be sure to turn OFF the NSA-series Industrial PC power supply (external input power
supply) before you remove the side cover and set the DIP switch.
1. Turn OFF the NSA-series Industrial PC power supply (external input power
supply) and loosen the three screws securing the side cover.
Side cover
fastening screws
Summary of Contents for NSA
