![background image](http://html1.mh-extra.com/html/omron/nsa/nsa_manual_743135054.webp)
3-4 Starting the Industrial PC and Procedure after Power Interruption
3-4-3 Installation Procedure
3-16
3
In
st
alling t
h
e NSA-
ser
ies I
n
dust
rial PC and Connect
ing Per
ipher
al Devices
3-4-3 Installation Procedure
Follow the steps below to mount the memory card to the connector at the bottom
of the NSA-series Industrial PC.
Protrusion
Back of
Memory Card
Notch
Enlarged Memory Card Diagram
Insert the Memory Card with the backside facing up.
The backside is the side with the notches and
protrusion.
Notch
Protrusion
Side View
1. Loosen the thumbscrew on the memory card cover, rotate the cover up to the
Install/Remove position, and secure the cover in place.
2. Push the memory card in firmly as far as it will go. The Eject Button will pop out
when the memory card is secured in place.
3. Loosen the thumbscrew on the memory card cover, rotate the cover down to
the Installed position, and secure the cover in place.
Eject Button
Rear
Install/Remove
Installed
Summary of Contents for NSA
