![background image](http://html1.mh-extra.com/html/omron/nsa/nsa_manual_743135034.webp)
2-1 Nomenclature
2-1-1 Front Panel
2-2
2
Nom
enclat
u
re
2-1 Nomenclature
2-1-1 Front Panel
POWER Indicator
Green lamp is lit when the power is ON.
Display Area
The entire display area is a touch panel and
input device.
2-1-2 Rear Panel
Side Cover
Remove the Cover to install a PCI
Board or to set the DIP switch.
PCI Board Connector
Use this Connector to install a PCI
Board.
View with Side
Cover removed
Side Cover Fastening Screws
Loosen these three screws to remove the Side Cover.
Functional Ground Terminal
This terminal prevents noise-induced
malfunctions.
UPS Power Interrupt Signal Connector
This connector is used for the power interrupt signal from the UPS.
DIAG Indicator
This indicator is disabled during normal operation and enabled
only during RAS Board self-diagnosis.
ERR Indicator
The red lamp is lit when a RAS failure occurs.
RUN Indicator
The red lamp is flashing while the RAS Board is operating.
BATLOW Indicator
The red lamp is lit when the RAS Board backup battery is exhausted.
RAS Board
Use this Board to monitor the
status of the Unit.
Summary of Contents for NSA
