![background image](http://html1.mh-extra.com/html/omron/d6fz-fgs1000/d6fz-fgs1000_user-manual_740811047.webp)
3. Check and Preparation
3-15
(3)
Changing IP Address
The following shows the procedure to change the factory default "192.168.0.20" to
"192.168.0.21".
Display
(Upper/Lower)
Operation
IP
DISP
Display the first segment of the IP address. Press the
▽
or
△
key until "P 1" appears at the upper row.
↓
▽
or
△
Key
IP 1
192
Check that "192" is displayed at the lower row, and press the
▽
key.
If "192" is not displayed, change the value referring to the changing
"IP 4" example shown later.
↓
▽
Key
IP 2
168
Check that "168" is displayed at the lower row, and press the
▽
key.
If "168" is not displayed, change the value referring to the changing
"IP 4" example shown later.
↓
▽
Key
IP 3
0
Check that "0" is displayed at the lower row, and press the
▽
key.
If "0" is not displayed, change the value referring to the changing
"IP 4" example shown later.
↓
▽
Key
IP 4
20
Press the SET/REC/STOP key to change the value displayed at
the lower row to "21".
↓
SET/REC/STOP Key
IP 4
020
↑Blinking
The value starts blinking. Press the
▽
or
△
key to change the
value to "21".
↓
▽
or
△
Key
IP 4
021
↑Blinking
Press the SET/REC/STOP key to apply the value. Blinking stops.
↓
SET/REC/STOP Key
IP 4
21
To check or change the subnet mask, press the
▽
key to display
"SUB1" at the upper row.
↓
▽
Key
Check that SUB1 to SUB4 are set to 255, 255, 255 and 0 respectively and apply them
in the same way as the procedure above.
After the settings for IP 1 to IP 4 and SUB1 to SUB4 are completed, press the MODE
key.
"RESET" is displayed and the unit resets itself after the MODE key is pressed again and
THR mode is exited..