![background image](http://html1.mh-extra.com/html/omron/d6fz-fgs1000/d6fz-fgs1000_user-manual_740811018.webp)
1. Product Overview
1-4
1.2.1 Single Air Flow Sensor Unit Connection
The usage combined with only a single Air Flow Sensor unit.
<
D6FZ-FGS1000
>
The measured data can be output from two analog systems or a single pulse system. (A
T-branch connector cannot be used for analog or pulse output.)
<
D6FZ-FGT
>
The measured data can be output from analog systems, a single pulse system, Judgment
output or unit error output. (A T-branch connector cannot be used for analog, pulse output,
Judgment output or unit error output.)
1.2.2 Local Connection
The Air Flow Station can be used standalone without being connected to a network. The
measured data is recorded in the internal memory, which can be transferred to a PC via an
SD memory card. The recorded data to the SD memory card can be displayed in graphics
using the PC software. (Refer to the PC software "User's Manual" for the details.)
1.2.3 Network Connection
Air Flow Stations can be connected to a PC via network. The following operations are
available by using the PC software. (Refer to the PC software "User's Manual" for details.)
(1)
Recording the measurement data on PC
By using the PC software, the measurement data can be recorded on PC. The data of the
Air Flow Station is displayed on the graph off-line.
(2)
Remote setting / Remote operation via PC
By using the PC software, it is possible to set the setting of the air flow station
(except the IP address setting), and to operate remotely via computer such as recording
Start/Stop.