![background image](http://html1.mh-extra.com/html/omron/cx-profibus-1-0/cx-profibus-1-0_operation-manual_744199044.webp)
29
CS1/CJ1W-PRM21 PROFIBUS Master DTM
Section 2-3
Note
The Configuration User Interface for each of the two CS1/CJ1 PROFIBUS
Master DTMs contains the same views and setting options.
Master DTM Configuration
User Interface
The Master DTM Configuration User Interface contains four tabs:
• Device Setup tab
• Master Setup tab
• Bus Parameters tab
• Slave Area tab
The four tabs are discussed below.
Configuration Interface
Buttons
The Master DTM Configuration User Interface contains four general buttons.
They are listed in the table below, together with the action taken when press-
ing them.
Button
Action
OK
Evaluate, and save the changes made (if any) and close the user
interface.
Note
If any invalid settings have been made, a warning message
will be displayed, allowing cancellation of the command.
Cancel
Closes the user interface without saving.
Note
If any changes were made, a warning message is displayed,
allowing cancellation of the command.
Help
Launch context sensitive Help for the Active tab.
Save
Evaluate changes and save them.