Universal Control 1.1 svn 2108 Update
This Universal Control update contains a firmware update to resolves two known
issues with the StudioLive 24.4.2 mixer and contains the following improvements
StudioLive 24.4.2: Resolves known refresh issue with channels 17 20 in Aux
Mix 1
StudioLive 24.4.2: Resolves known refresh issue with FXA & FXB returns in
Aux Mix 1 10
StudioLive 16.4.2 & 24.4.2:
Improves GEQ algorithm to allow for faster curve
refit with fewer artifacts during drastic changes to the EQ curve
Updates StudioLive 16.4.2 to firmware version 1.13 build 158
Updates StudioLive 24.4.2 t o firmware version 1.0 build 166
Installation Instructions (Mac and Windows)
1.
Quit out of Universal Control and disconnect your unit from your computer.
2.
Run the installer and follow the onscreen instructions. Both installers require
that your computer be rebooted upon successful their completion.
3.
Once your computer has restarted, connect your FireStudio or StudioLive
series device and open Universal Control
4.
Open the Launch Window and go to Settings>Check Firmware to verify that
s firmware is up to date
5.
StudioLive users only
: Once your StudioLive firmware has been updated, you
will be given the option to Restore your user presets and scenes back to your
be undone.
Please Note: With any firmware update there is a small risk that some scenes
or presets will be lost, because of this, it is highly recommended that you back
up your scenes and presets in VSL prior to running the Universal Control svn
2108 update.
Known Issues (VSL 1.1 only)
To assign a channel or FX bus to a Subgroup from within the Channel tab, the
the StudioLive or from within the Overview tab.
correctly to Faders set to inf in VSL
VSL and firmware updater will not launch on Mac PPC machines. PPC users
can continue to use the 3.5.2 driver as normal without control panel features.
StudioLive 16.4.2 only, LCD doesn t display current frequency band and gain
changes in real time.
Aux Post and Solo aren t linked between cascaded mixers.
