![background image](http://html1.mh-extra.com/html/omron/cx-profibus-1-0/cx-profibus-1-0_operation-manual_744199032.webp)
17
CX-Profibus
Section 2-2
Therefore, the following window will be displayed on top of the CX-Profibus
application window.
Select
Yes
to generate the Device Catalogue for the first time. This action may
take several minutes depending on the number of installed DTMs.
After updating the Device Catalogue, it will open in the CX-Profibus applica-
tion window.
2-2-2
CX-Profibus Main Window
The main application window of CX-Profibus will open with a New Project.
After the first start up, the Device Catalogue will be opened automatically. If
not, the Device Catalogue may be opened from the menu.
The figure below shows the opened CX-Profibus application window with a
Project already containing a network, and the Device Catalogue window
opened.
The main components in this window are
• The Network view.
• The DTM / Catalogue view.
• The Error Log view.
• The FDT Monitoring view (not shown in the figure above).
Network view
Device Catalogue
Error Log and FDT Monitoring view
DTM view
Status Bar
Tool Bar