![background image](http://html1.mh-extra.com/html/omron/cx-profibus-1-0/cx-profibus-1-0_operation-manual_744199063.webp)
48
C200HW-PRM21 PROFIBUS Master DTM
Section 2-4
2-4
C200HW-PRM21 PROFIBUS Master DTM
C200HW-PRM21 Master
DTM
To allow configuration and data monitoring for a C200HW-PRM21 from within
CX-Profibus a C200HW-PRM21 PROFIBUS DP Master DTM is available,
which can be operated from CX-Profibus.
The C200HW-PRM21 PROFIBUS DP Master DTM has two main user inter-
face components.
• DTM Configuration User Interface
This user interface facilitates configuration of the Master Unit.
• DTM Diagnostics User Interface
The DTM Diagnostics User Interface facilitates Unit status determination,
and the slave status determination.
This section provides an overview of the C200HW-PRM21 PROFIBUS DP
Master DTM, and discusses both user interfaces.
2-4-1
Configuration User Interface
The configuration DTM is opened by
• Selecting the C200HW-PRM21 Master DTM in the Network view, and
double-clicking the left mouse button.
• Selecting the Master DTM in the Network view, and right-clicking the
mouse. From the context menu, select
Configuration
.
The Master DTM Configuration User Interface, which is displayed in the CX-
Profibus DTM view is shown below.
Master DTM Configuration
User Interface
The Master DTM Configuration User Interface consist of two tabs:
• Bus Parameters tab
• Address Table tab
The two tabs are discussed below.
Configuration Interface
Buttons
The Master DTM Configuration User Interface contains four general buttons.
They are listed in the table below, together with the action taken when press-
ing them.