Omron CS1W-DRM21, Operation Manual

Page: 178 / 379

161
Temperature Input Terminals Section 4-9
Rotary Switch Setting Set the common input classification and input signal range for each input with
the rotary switch. (The input classification and input range cannot be set for 4-
point classification.)
Note Always turn OFF the Slave’s power supply (including the communications
power supply) before changing any settings.
DRT1-TS04T
The following table shows the input classifications and input ranges according
to the rotary switch settings.
DRT1-TS04P
The following table shows the input classifications and input ranges according
to the rotary switch settings.
Number Input classification Range (
°
C) Range (
°
F)
0 R 0 to 1700 0 to 3000
1 S 0 to 1700 0 to 3000
2 K1 –200 to 1300 –300 to 2300
3 K2 0.0 to 500.0 0.0 to 900.0
4 J1 –100 to 850 –100 to 1500
5 J2 0.0 to 400.0 0.0 to 750.0
6 T –200.0 to 400.0 –300.0 to 700.0
7 E 0 to 600 0 to 1100
8 L1 –100 to 850 –100 to 1500
9 L2 0.0 to 400.0 0.0 to 750.0
A U –200.0 to 400.0 –300.0 to 700.0
B N –200 to 1300 –300 to 2300
C W 0 to 2300 0 to 4100
D B 100 to 1800 300 to 3200
E PL II 0 to 1300 0 to 2300
F Cannot be set.
Number Input classification Range (
°
C) Range (
°
F)
0 PT100 –200.0 to 650.0 –300.0 to 1200.0
1 JPT100 –200.0 to 650.0 –300.0 to 1200.0
2 to 9 Cannot be set.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com