Omron CS1W-DRM21, Operation Manual

Page: 126 / 379

109
Transistor Remote I/O Terminals with Connectors Section 4-5
The following cables are also available with a MIL connector on the Remote I/
O Terminal end and loose wires on the other end.
The MIL pin numbers, loose wire colors, dot markings, and dot colors are
listed in the following table.
DRT1-MD32ML G79-M50-25-D1 (50 cm)
G79-M75-50-D1 (75 cm) Inputs: G7TC-ID16/IA16
Outputs: G7TC-OC08/OC16
G70D-SOC16/VSOC16
G70A-ZOC16-3
I/O are distinguished by color.
Input tube color: Red
Output tube color: Yellow
DRT1-ID32ML-1 G79-I50-25-D2 (50 cm)
G79-I75-50-D2 (75 cm) G70A-ZIM16-5 ---
DRT1-OD32ML-1 G79-O50-25-D1 (50 cm)
G79-O75-50-D1 (75 cm) G70A-ZOC16-4
G70D-SOC16-1 ---
G79-I50-25-D1 (50 cm)
G79-I75-50-D1 (75 cm) G7TC-OC16-4
M7F ---
DRT1-MD32ML-1 G79-M50-25-D2 (50 cm)
G79-M75-50-D2 (75 cm) Inputs: G70A-ZIM16-5
Outputs: G70A-ZOC16-4
G70D-SOC16-1
I/O are distinguished by color.
Input tube color: Red
Output tube color: Yellow
Slave MIL Cable I/O Relay Block or other I/O
Terminal
Remarks
MIL Cable Remarks
G79-A200C-D1 (2 m)
G79-A500C-D1 (5 m) Loose wire size: AWG28
Loose wires are cut.
G79-Y100C-D1 (1 m)
G79-Y200C-D1 (2 m)
G79-Y500C-D1 (5 m) Forked terminals are attached to the loose wires.
Forked terminals: 161071-M2 (Nippon Terminal)
Pin
No. Core
color
Dot
marking
Dot color Pin
No.
Core
color
Dot
marking
Dot color
1 Light
brown
■
Black 21 Light
brown
■ ■ ■
Black
2 Red 22 Red
3 Yellow Black 23 Yellow Black
4 Red 24 Red
5 Light
green Black 25 Light
green Black
6 Red 26 Red
7 Gray Black 27 Gray Black
8 Red 28 Red
9 White Black 29 White Black
10 Red 30 Red
11 Light
brown
■ ■
Black 31 Light
brown
■ ■ ■ ■
Black
12 Red 32 Red
13 Yellow Black 33 Yellow Black
14 Red 34 Red
15 Light
green Black 35 Light
green Black
16 Red 36 Red
17 Gray Black 37 Gray Black
18 Red 38 Red
19 White Black 39 White Black
20 Red 40 Red
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com