3-4
Section
$
Use the following procedure when connecting a soldered connector.
1, 2, 3...
1. Align the connector and insert it into the Unit.
2. Use a Phillips screwdriver to tighten the connector’s fastening screws.
Phillips screwdriver
Use the following procedure when wiring and assembling a soldered connector
(OMRON C500-CE241).
1, 2, 3...
1. Slide heat-shrink tubing over the power supply wires and solder the wires to
the appropriate pins on the socket.
Heat-shrink tubing
Power supply wires
Connector
2. After soldering all of the pins, slide the heat-shrink tubing over the soldered
power supply pins and shrink the tubing by heating it with a heat gun.
Heat-shrink tubing
Connecting I/O Connectors
(Soldered Connectors)
Assembling Soldered
Connectors
Summary of Contents for CPM2C
