Omron CPM2C, Operation Manual

Page: 63 / 163

!
3-4 Section
$
3-3-2 CPM2C Installation
The CPM2C can be installed on a 35-mm DIN track.
End Plates
(PFP-M)
DIN Track
PFP-100N (1 m)
PFP-50N (50 cm)
PFP-100N2 (1 m)
Installation
Lower the CPM2C so that the notch on the back of the PC catches the top of the
DIN Track. Push the PC forward until the lock snaps into place.
4) Lock
1) Pull down.
2) Insert
onto track.
3) Push in on
the Unit.
Caution Be sure that the DIN Track is installed horizontally. Installing the Track vertically
will inhibit the airflow that cools the CPM2C and could cause overheating.
Removal
Pry the lock down with a flat-blade screwdriver and pivot the PC upward to
remove it.
Screwdriver
3-4 Wiring and Connections
This section provides basic information on wiring the Power Supply Unit and
Expansion I/O Units, and on connecting Programming Devices.