4-5
Section
*
3. Press the CHG Key to change the date and/or time.
CHG
..,,
!-!
%&
The digit that can be changed will flash. If necessary, input a new value with
the Up and Down Arrow Keys or Numeric Keys. Press the CHG Key to move
the cursor to the next digit. The following table shows the setting ranges for
each value.
Year
Month
Day
Hour
Minute
Second
Day-of-week
00 to 99
01 to 12
01 to 31
00 to 23
00 to 59
00 to 59
0 to 6
(SUN to SAT)
4. Press the WRITE Key to write the new value.
WRITE
"!$
Press the CLR Key to return to the initial display.
4-5
Programming Example
This section demonstrates all of the steps needed to write a program with the
Programming Console.
4-5-1 Preparatory Operations
Use the following procedure when writing a program to the CPM2C for the first
time.
1, 2, 3...
1. Set the Programming Console’s mode switch to PROGRAM mode and turn
ON the CPM2C’s power supply. The password input display will appear on
the Programming Console.
RUN
MONITOR
PROGRAM
2. Enter the password by pressing the CLR and then the MONTR Key.
CLR
MONTR
3. Clear the CPM2C’s memory by pressing the CLR, SET, NOT, RESET, and
then the MONTR Key. Press the CLR Key several times if memory errors are
displayed.
CLR
SET
NOT
RESET
MONTR
Summary of Contents for CPM2C
