![background image](http://html1.mh-extra.com/html/omron/cpm2c/cpm2c_operation-manual_742519095.webp)
4-1
Section
%&'
The SYSMAC-CPT Support Software can display programs in ladder-diagram
format or mnemonic format. To switch the display/editing format, select
“View (V)” from the menu bar, “Program editor (P),” and then “Ladder (L)” or
“Mnemonic (M).”
Ladder-diagram format
Mnemonic format
Refer to
3-4-8 Programming Device Connections
for details on connecting the
CPM2C to a personal computer.
Turn ON Communications Switch 2 before connecting the CPM2C to a personal
computer running the SYSMAC-CPT Support Software.
Communications Switch 2
(Turn ON when using SYSMAC-CPT
Support Software.)
Note Do not turn ON Communications Switch 2 if the CPM2C is connected to a Pro-
gramming
Console
or
other
device
such
as
a
CPM1-CIF01/11
or
CQM1-CIF01/02. If the switch is turned ON, communications will be interrupted
and a communications error will occur. A Programming Console will become un-
responsive, key inputs won’t be received, and the display will not change.
Operating Modes
The operating mode of the CPM2C when the power is turned ON depends upon
the PC Setup settings and the Programming Console’s mode switch setting if a
Programming Console is connected. See
1-3-3 Operating Mode at Startup
for
details.
The CMP2C has three operating modes: PROGRAM, MONITOR, and RUN.
When the CPT is offline, the CPM2C will operate in PROGRAM mode. When the
CPT is online, the CPM2C operating mode can be controlled from the CPT.
Writing and Editing the
Ladder Program
Transferring the Program
Summary of Contents for CPM2C
