4 Mounting and Wiring
4 - 4
CK3E-series Programmable Multi-Axis Controller Hardware User’s Manual (I610)
4-2
Power Supply Wiring
The following power supply connector is used for the Programmable Multi-Axis Controller.
One power supply connector is included in the Programmable Multi-Axis Controller package.
The following shows the pin assignment of the power supply connector used for the Programmable
Multi-Axis Controller.
Wires that can be connected to terminal holes of the power supply connector are bar terminals attached
to twisted wires, twisted wires, and solid wires.
Select a power supply conductor by considering voltage drops and heat due to the cable length within
your installation environment. The following table provides information about the conductors that are
compatible with this connector.
4-2-1
Power Supply Connector Specifications
Model
Manufacturer
MVSTBW 2.5/3-ST-5,08 (1792760)
Phoenix Contact
Pin
Description
1
24 VDC
2
0 VDC
3
Functional ground terminal
4-2-2
Wiring the Power Supply Connector
Compatible Wires
Wire type
Conductor cross-sec-
tional area
Conductor length
(stripping length)
Solid wire
0.2 to 2.5 mm
2
7 mm
Twisted wire
0.2 to 2.5 mm
2
7 mm
Twisted wire with bar terminal, without plastic sleeve
0.25 to 2.5 mm
2
7 mm
Twisted wire with bar terminal, with plastic sleeve
0.25 to 2.5 mm
2
7 mm
1
2
3