15
Precautions for Correct Use
CK3E-series Programmable Multi-Axis Controller Hardware User’s Manual (I610)
Precautions for Correct Use
• Follow the instructions in this manual to correctly perform installation.
• Do not operate or store the Controller in the following locations. Doing so may result in a malfunction
or halt operations.
a) Locations subject to direct sunlight
b) Locations subject to temperatures or humidity outside the range specified in the specifications
c) Locations subject to condensation as a result of severe changes in temperature
d) Locations subject to corrosive or flammable gases
e) Locations subject to dust (especially iron dust) or salts
f) Locations subject to exposure to water, oil, or chemicals
g) Locations subject to shock or vibration
• Take appropriate and sufficient countermeasures when installing the Controller in the following loca-
tions.
a) Locations subject to strong, high-frequency noise
b) Locations subject to static electricity or other forms of noise
c) Locations subject to strong electromagnetic fields
d) Locations subject to possible exposure to radioactivity.
e) Locations close to power lines
• Install the Controller away from sources of heat and ensure appropriate ventilation. Not doing so may
result in a malfunction, operations halting, or burning.
• Always touch a grounded piece of metal to discharge static electricity from your body before starting
an installation or maintenance procedure.
• Do not allow wire clippings, shavings, or other foreign material to enter the Controller. Otherwise, the
Controller may experience a failure, malfunction, or ignite. Cover the Controller or take other suitable
countermeasures, in particular when carrying out wiring work.
• Always ensure the rated supply voltage is connected to the Controller.
• If a Task Period Exceeded error occurs, shorten the programs to fit in the task or increase the setting
of the task period.
• Do not disconnect the communications cable while the system is running. Doing so may result in a
failure or malfunction of the system.
• Do not download motion control settings during a Test Run.
Storage and Installation
Wiring
Task Settings
Operation
Motion Control